Category: 1352925-63-3

1352925-63-3, Ethyl 4,6-dihydroxypyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a glass lined reactor were charged toluene (0.26 Kg), sulfolane (3.4 Kg), compound 1 (1.0 Kg) and POCh (2.7 Kg). The crude was cooled to 0 C. Triethylamine (0.89 Kg) was charged, and the resulting crude mixture was heated to 65 C and aged till reaction reached completion. The reaction mass was cooled to 5 C. (0162) In a separate reactor, water (7.5 Kg) was charged and cooled to 5 C. The reaction mass was added slowly to the water solution, maintaining the internal temperature below 5 C. Additional water (0.5 Kg) was used to rinse the reactor and aid the transfer. The resulting mixture was agitated at 5 C for 3 hours, then extracted with MTBE three times (3 x 4.5 Kg). The combined organic layers were washed sequentially with aq pH 7 buffer solution (5.0 L/Kg, 15 wt% KH2PO4/K2HPO4) and water (2.5 Kg). The crude was distilled under vacuum until total volume became approximately 3 L/Kg. ACN (2 x 6.3 Kg) was added followed by additional distillations back to ~3 L/Kg. The crude was cooled to 20 C to afford Compound 2 as a 30-36 wt% solution in 90-95% yield

1352925-63-3, 1352925-63-3 Ethyl 4,6-dihydroxypyridazine-3-carboxylate 69007765, apyridazine compound, is more and more widely used in various fields.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; CHEN, Ke; DEERBERG, Joerg; LIN, Dong; DUMMELDINGER, Michael; INANKUR, Bahar; KOLOTUCHIN, Sergei V.; LI, Jun; ROGERS, Amanda J.; ROSSO, Victor W.; SIMMONS, Eric M.; SOUMEILLANT, Maxime C. D.; TREITLER, Daniel S.; WANG, Jianji; ZHENG, Bin; SMITH, Michael J.; STROTMAN, Neil A.; TYMONKO, Steven; BENKOVICS, Tamas; (43 pag.)WO2018/183649; (2018); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1352925-63-3,Ethyl 4,6-dihydroxypyridazine-3-carboxylate,as a common compound, the synthetic route is as follows.

1352925-63-3, To a solution of ethyl 4,6-dihydroxypyridazine-3-carboxylate (2.1 g, 11.40 mmol) in 40 ml NH3-CH3OH was held at room temperature with stirring on for 20h under N2. The solvents were removed in vacuo, and the residue was used to next step directly. m/z calcd for[C5H5N303]+ [M+H]+: 156.0; found: 156.0.

1352925-63-3 Ethyl 4,6-dihydroxypyridazine-3-carboxylate 69007765, apyridazine compound, is more and more widely used in various fields.

Reference：
Patent; GALECTO BIOTECH AB; BRIMERT, Thomas; JOHNSSON, Richard; LEFFLER, Hakon; NILSSON, Ulf; ZETTERBERG, Fredrik; (284 pag.)WO2016/120403; (2016); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1352925-63-3,Ethyl 4,6-dihydroxypyridazine-3-carboxylate,as a common compound, the synthetic route is as follows.

Step 3.Preparation of 4,6-dichloro-pyridazine-3-carboxylic acid methyl or ethyl ester 5 A mixture of 4,6-dihydroxy-pyridazine-3-carboxylic acid methyl or ethyl ester (50 mmol) and POCl3 (90 ML) is heated at 95 C. for 4 hours.The excess POCl3 is evaporated in vacuo and to the residue cooled to 0 C. was added ice (150 g) followed by EtOAc (200 ML).The layers are separated and the aqueous layer is extracted with EtOAc (2*100 ML).The combined extracts are washed with brine (200 ML), dried (Na2SO4) and evaporated in vacuo.This residue is purified by flash column chromatography (225 g silica gel, eluted with 4:1 hexane, EtOAc).The desired 4,6 dichloro-pyridazine-3-carboxylic acid methyl ester is obtained as a white solid, while the 4,6 dichloro-pyridazine-3-carboxylic acid ethyl ester is a colorless liquid., 1352925-63-3

The synthetic route of 1352925-63-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; Xie, Linghong; Han, Bingsong; Xu, Yuelian; Maynard, George D.; US2004/77653; (2004); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1352925-63-3,Ethyl 4,6-dihydroxypyridazine-3-carboxylate,as a common compound, the synthetic route is as follows.

In a 5000 ml rb flask, ethyl 4,6-dihydroxypyridazine-3-carboxylate (200 g, 1086 mmol) was dissolved in THF (2000 mL), methanol (1000 mL) and water (800 mL). LiOH (137 g, 3258 mmol) was added slowly at rt and stirred at rt for 3-4 hr. The starting material was gone. The solvent was removed at 50 C. under reduced pressure to afford a yellow solid. The solid was acidified with aqueous HCl solution (400 ml) (1:1 ratio) at 0 C. and stirred at rt for 30-40 minutes. The solid was filtered and washed with water. It was then dried under vacuum for 1-2 hr. This solid was taken into 300 ml of methanol:DCM (2:8) and stirred at rt for 20-25 minutes. The mixture was filtered and the solid was washed with methanol and dried under vacuum for 1 hr. The desired product was obtained as a yellow solid, 4,6-dihydroxypyridazine-3-carboxylic acid (153 g, 951 mmol, 88% yield). MS (M+1) m/z: 156.9 (MH+). LC retention time 0.31 min [A]. 1H NMR (400 MHz, deuterium oxide) delta 6.00-5.34 (m, 1H), 4.75 (s, 7H)

1352925-63-3, As the paragraph descriping shows that 1352925-63-3 is playing an increasingly important role.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; Liu, Chunjian; Yang, Michael G.; Xiao, Zili; Chen, Ling; Moslin, Ryan M.; Tokarski, John S.; Weinstein, David S.; (84 pag.)US2019/152948; (2019); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1352925-63-3,Ethyl 4,6-dihydroxypyridazine-3-carboxylate,as a common compound, the synthetic route is as follows.

Step 3[00162j To a 350 mL nitrogen purged Schlenk flask containing Int2 (3.77 g, 20.47 mmol) was added phosphorus oxychloride (38 mL, 408 mmol). The vessel was sealed and heated to 100 C for 3.5 hours. The reaction was cooled to room temperature and the excess phosphorus oxychloride was removed in vacuo. The crude oil was dissolved into chloroform, re-concentrated and then poured into ice water, rinsing with ethyl acetate.The two layers were transferred to a separatory funnel, separated and the aqueous layer extracted 3x with ethyl acetate. The combined organic layers were washed twice with water and once with brine (saturated aqueous sodium chloride) and then dried over sodium sulfate, filtered, concentrated and then purified by automated chromatography (5- 90% EtOAc:hexanes), providing Int3 (3.64 g, 16.3 mmol). ?H NMR (400MHz, chloroform-d) oe 7.70 (s, 1H), 4.55 (qd, J=7.1, 1.1 Hz, 2H), 1.46 (td, J=7.2, 0.9 Hz, 3H). LC retention time 0.79 [J]. MS(E) m/z: 221 (MHj., 1352925-63-3

1352925-63-3 Ethyl 4,6-dihydroxypyridazine-3-carboxylate 69007765, apyridazine compound, is more and more widely used in various fields.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; MOSLIN, Ryan M.; WEINSTEIN, David S.; WROBLESKI, Stephen T.; TOKARSKI, John S.; KUMAR, Amit; WO2014/74661; (2014); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

1352925-63-3, Ethyl 4,6-dihydroxypyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1352925-63-3, To a glass lined reactor were charged toluene (0 26 kg), sulfolane (3.4 kg), Compound 1 (1.0 kg) and PQCh (2.7 kg). The crude was cooled to 0 C. Triethylamine (0.89 kg) was charged, and the resulting crude mixture was heated to 65 C and aged till the reaction reached completion. The reaction mass was cooled to 5 C. In a separate reactor, water (7.5 kg) was charged and cooled to 5 C The reaction mass was added slowly to the water solution, maintaining the internal temperature below 5 C. Additional water (0 5 kg) was used to rinse the reactor and aid the transfer. The resulting mixture was agitated at 5 C for 3 hours, then extracted with MTBE three times (3 x 4 5 kg). The combined organic layers were washed sequentially with aqueous pH 7 buffer solution (5.0 L/kg, 15 wt% KH2PO4/K2HPO4) and ‘ater (2.5 kg). The erode was distilled under vacuum until total volume became approximately 3 L/kg ACN (2 x 6 3 kg) was added followed by additional distillations back to -3 L/kg. The crude was cooled to 20 C to afford Compound 2 as a 30-36 wt% solution in 90-95% yield.

The synthetic route of 1352925-63-3 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; ROBERTS, Daniel Richard; (0 pag.)WO2019/232138; (2019); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

1352925-63-3, Ethyl 4,6-dihydroxypyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0177j A mixture 5-5 (3.38 g, 18.3 mmol) in POC13 (35 ml) was heated at 95 C for 5 hr.The excess POC13 was removed under vacuum, to the residue ice was added followed byethyl acetate. The organic phase was separated, washed with 5% NaHCO3, dried over Na2SO4, and concentrated to give compound 5-6 as an oil (3.27 g), 1352925-63-3

As the paragraph descriping shows that 1352925-63-3 is playing an increasingly important role.

Reference：
Patent; PORTOLA PHARMACEUTICALS, INC.; XU, Qing; SONG, Yonghong; PANDEY, Anjali; WO2015/123453; (2015); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

1352925-63-3, Ethyl 4,6-dihydroxypyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 5000 ml rb flask, ethyl 4,6-dihydroxypyridazine-3-carboxylate (200 g, 1086 mmol) was dissolved in THF (2000 mL), methanol (1000 mL) and water (800 mL). LiOH (137 g, 3258 mmol) was added slowly at rt and stirred at rt for 3-4 hr. The starting material was gone. The solvent was removed at 50 C. under reduced pressure to afford a yellow solid. The solid was acidified with aqueous HCl solution (400 ml) (1:1 ratio) at 0 C. and stirred at rt for 30-40 minutes. The solid was filtered and washed with water. It was then dried under vacuum for 1-2 hr. This solid was taken into 300 ml of methanol:DCM (2:8) and stirred at rt for 20-25 minutes. The mixture was filtered and the solid was washed with methanol and dried under vacuum for 1 hr. The desired product was obtained as a yellow solid, 4,6-dihydroxypyridazine-3-carboxylic acid (153 g, 951 mmol, 88% yield). MS (M+1) m/z: 156.9 (MH+). LC retention time 0.31 min [A]. 1H NMR (400 MHz, deuterium oxide) delta 6.00-5.34 (m, 1H), 4.75 (s, 7H), 1352925-63-3

As the paragraph descriping shows that 1352925-63-3 is playing an increasingly important role.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; Liu, Chunjian; Yang, Michael G.; Xiao, Zili; Chen, Ling; Moslin, Ryan M.; Tokarski, John S.; Weinstein, David S.; (84 pag.)US2019/152948; (2019); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1352925-63-3,Ethyl 4,6-dihydroxypyridazine-3-carboxylate,as a common compound, the synthetic route is as follows.

A solution of ethyl 4, 6-dihydroxypyridazine-3-carboxylate (compound 47.4; 3.2 g, 17.387 mmol) in phosphorus oxychloride (35 mL, 226.037 mmol) was heated at 100 C for 3.5 h. The resulting reaction mixture was cooled to ambient temperature and the excess of phosphorus oxychloride was removed under vacuum. The traces phosphorus oxychloride was further removed by azeotropic distillation with chloroform (50 mL). The resulting residue was taken up in to ice water and extracted with EtOAc (3 x 500 mL). The combined organic layers were washed with water (100 mL), brine (100 mL), dried over Na2S04, filtered and concentrated under reduced pressure. The resulting crude material was purified by flash chromatography (60-70% EtOAc in hexane) yielding ethyl 4, 6-dichloropyridazine-3- carboxylate (compound 47.3; 2.5 g, 11.310 mmol). LCMS: Method B, 3.750 min, MS: ES+ 219.98 (M+l)., 1352925-63-3

As the paragraph descriping shows that 1352925-63-3 is playing an increasingly important role.

Reference：
Patent; ORFAN BIOTECH INC.; MAAG, Hans; FERNANDES, Miguel Xavier; (160 pag.)WO2019/133813; (2019); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

1352925-63-3, Ethyl 4,6-dihydroxypyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a glass lined reactor were charged toluene (0.26 Kg), sulfolane (3.4 Kg), compound 1 (1.0 Kg) and POCh (2.7 Kg). The crude was cooled to 0 C. Triethylamine (0.89 Kg) was charged, and the resulting crude mixture was heated to 65 C and aged till reaction reached completion. The reaction mass was cooled to 5 C. (0162) In a separate reactor, water (7.5 Kg) was charged and cooled to 5 C. The reaction mass was added slowly to the water solution, maintaining the internal temperature below 5 C. Additional water (0.5 Kg) was used to rinse the reactor and aid the transfer. The resulting mixture was agitated at 5 C for 3 hours, then extracted with MTBE three times (3 x 4.5 Kg). The combined organic layers were washed sequentially with aq pH 7 buffer solution (5.0 L/Kg, 15 wt% KH2PO4/K2HPO4) and water (2.5 Kg). The crude was distilled under vacuum until total volume became approximately 3 L/Kg. ACN (2 x 6.3 Kg) was added followed by additional distillations back to ~3 L/Kg. The crude was cooled to 20 C to afford Compound 2 as a 30-36 wt% solution in 90-95% yield

1352925-63-3, 1352925-63-3 Ethyl 4,6-dihydroxypyridazine-3-carboxylate 69007765, apyridazine compound, is more and more widely used in various fields.

Reference：
Patent; BRISTOL-MYERS SQUIBB COMPANY; CHEN, Ke; DEERBERG, Joerg; LIN, Dong; DUMMELDINGER, Michael; INANKUR, Bahar; KOLOTUCHIN, Sergei V.; LI, Jun; ROGERS, Amanda J.; ROSSO, Victor W.; SIMMONS, Eric M.; SOUMEILLANT, Maxime C. D.; TREITLER, Daniel S.; WANG, Jianji; ZHENG, Bin; SMITH, Michael J.; STROTMAN, Neil A.; TYMONKO, Steven; BENKOVICS, Tamas; (43 pag.)WO2018/183649; (2018); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem