Month: October 2020

89284-10-6,89284-10-6, 3,6-Dibromo-4-methylpyridazine is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

NBS (2.16 g, 12 mmol) and compound 29-1 (2.5 g, 10 mmol) were dissolved in CCl4(20 mL) and dibenzoylperoxide (0.24 g, 1.0 mmol) was slowly added dropwise at 0 C.After the addition was completed, the mixture was stirred at room temperature for 15minutes and refluxed for 7.0 hours. After the reaction is complete, CCl is removed 4Theresidue was dissolved in EtOAc (100 mL), washed with water (50 mL x 3) and brine, driedover anhydrous sodium sulfate and concentrated to give 3.2 g of crude product, which wasused directly in the next reaction.

89284-10-6 3,6-Dibromo-4-methylpyridazine 415589, apyridazine compound, is more and more widely used in various fields.

Reference£º
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Zhang Yingjun; Zhang Jiancun; Xie Hongming; Ren Qingyun; Hu Bolin; Wu Xiwei; Fu Changping; Li Shifeng; Wang Chaohe; Li Jing; (183 pag.)CN103880823; (2017); B;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

6082-66-2, 3,4,6-Trichloropyridazine is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of substituted phenol (5 mmol) in dimethyl formamide (20 mL) was added 60% sodium hydride (5 mmol) under ice-water bath. After further stirring for 30 min, 3,4,6-trichloropyridazine (6, 5 mmol) was added and reacted at room temperature for 1-24 h. The reaction solution was poured into cold water, then the formed solid was filtered, washed with water and dried to give intermediate 7, which didn?t need any further purification. Intermediate 7 (5 mmol) with substituted aniline (5 mmol) and a few drops of 12 M hydrochloric acid was added and boiled with 50 ml ethanol for 12-48 h under reflux. The reaction solution was poured into cold water, then alkalized to pH 8 with 4 M NaOH solution. Then the solid was filtered, washed with water, dried and recrystallized from DMF/H2O to obtain pyridazine derivatives 8a-l. (0017) Pyridazine derivatives (2 mmol) was boiled with 10 mL acetic acid under reflux overnight. The reaction solution was poured into cold water, then alkalized to pH 8 with 4 M NaOH solution. Then the solid was filtered, washed with water, dried and recrystallized from DMF/H2O to obtain pyridazinone derivatives 9a-l. To a mixture of 9e (2 mmol) in DMF (10 mL) was added absolute potassium carbonate (4 mmol) followed by iodomethane (2 mmol). The solution was refluxed overnight, then poured into cold water, filtered, washed with water, dried and recrystallized from DMF/H2O to obtain 9m. To a mixture of 9e (2 mmol) in DMF (10 mL) was added absolute potassium carbonate (8 mmol) followed by iodomethane (4 mmol). The solution was refluxed overnight, then poured into cold water, filtered, washed with water, dried and recrystallized from DMF/H2O to obtain 9n., 6082-66-2

6082-66-2 3,4,6-Trichloropyridazine 95123, apyridazine compound, is more and more widely used in various fields.

Reference£º
Article; Li, Dongyue; Zhan, Peng; Liu, Huiqing; Pannecouque, Christophe; Balzarini, Jan; De Clercq, Erik; Liu, Xinyong; Bioorganic and Medicinal Chemistry; vol. 21; 7; (2013); p. 2128 – 2134;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

51149-08-7, 3,6-Dichloropyridazine-4-carboxylic acid is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

51149-08-7, 3-[6-Bromo-2-fluoro-3-(1H-pyrazolo[3,4-c]pyridazin-3-ylmethyl)-phenoxy]-5-chloro-benzonitrile (R-73) step 1-To a solution of 3,6-dichloro-4-carboxy-pyridazine (R-74a, 7.5 g, 38.9 mmol, Aldrich) in DCM (30 mL) and MeOH (10 mL) cooled to 0 C. was added a solution of (trimethylsilyl)diazomethane (2.0 M in hexane), slowly via pipette, until a persistent yellow color is observed. After addition was complete, the solvents were removed in vacuo. The crude product was purified by SiO2 chromatography eluting with an EtOAc/hexane gradient (10 to 25% EtOAc) to afford 3.89 g (86%) of R-74b as a brown oil that solidifies on standing.

51149-08-7 3,6-Dichloropyridazine-4-carboxylic acid 433804, apyridazine compound, is more and more widely used in various fields.

Reference£º
Patent; Billedeau, Roland Joseph; Sweeney, Zachary Kevin; US2009/170856; (2009); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

35857-89-7, 6-Chloropyridazine-3-carbonitrile is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Coupling according to general procedure II:Amine intermediate: {(3S,4R)-3-(4-Chloro-phenyl)-4-[1-((S)-5-chloro-pyridin-2-yloxy)-ethyl]pyrrolidin-1-yl}-piperidin-4-yl-methanone (VIII-B-1)Heteroaryl: 6-Chloro-pyridazine-3-carbonitrile (commercially available),ES-MS m/e: 551.3 (M+H+). General Procedure II: Aromatic Nucleophilic SubstitutionTo a stirred solution of an amine of type VIII (1 mmol) in DMF (5 mL) was added EtNiPr2 (1.5 mmol) and a substituted chloropyridine, chloropyrimidine, or chloropyridazine (1.3 mmol). The reaction mixture was heated at 60 until completion (reaction monitored by TLC or LCMS). Thereaction mixture was concentrated under vacuo, taken up in EtOAc and washed with H2O several times. The organic phase was dried over Na2SO4, concentrated under vacuo and then purified by preparative HPLC or column chromatography to yield the title product., 35857-89-7

As the paragraph descriping shows that 35857-89-7 is playing an increasingly important role.

Reference£º
Patent; Jablonski, Philippe; Knust, Henner; Nettekoven, Matthias; Patiny-Adam, Angelique; Ratni, Hasane; Riemer, Claus; US2011/53948; (2011); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

372118-01-9, Methyl 4,6-dichloropyridazine-3-carboxylate is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 4,6-dichloropyridazine-3-carboxylic acid methyl ester 1a (519 mg, 2.51 mmol)And 4- (pentafluorosulfanyl) aniline (500 mg, 2.28 mmol) in ethanol (5 mL),Heat to 70 C and stir for 24 hours.After cooling to room temperature, the solvent was removed under reduced pressure,The target product 6-chloro-4-((4- (pentafluoro-lambda6-sulfanyl) phenyl) amino) pyridazine-3-carboxylic acid methyl ester 16a (1.37 g, crude) was obtained.The product was used in the next reaction without further purification., 372118-01-9

372118-01-9 Methyl 4,6-dichloropyridazine-3-carboxylate 17848322, apyridazine compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing Nuochengjianhua Pharmaceutical Technology Co., Ltd.; Chen Xiangyang; Pang Yucheng; (142 pag.)CN110818641; (2020); A;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.14161-11-6,3,4,5-Trichloropyridazine,as a common compound, the synthetic route is as follows.

Example 157 4-Isopropylamino-3,5-dichloropyridazine 3,4,5-Trichloropyridazine (9.2 g 0.05 mol) is dissolved in toluene (24 ml). Isopropylamine (16.5 g, 0.28 mol) is added and the mixture refluxed three hrs. The solution is cooled, diluted with chloroform and sodium hydroxide (1N). The organic phase is separated, washed with water and saline, then dried over sodium sulfate, filtered and concentrated. The concentrate is chromatographed (silica gel, 300 g; ethyl acetate/hexane (30/70)) to give the title compound, NMR (300 MHz, CDCl3) 8.50, 4.74, 4.47 and 1.20delta., 14161-11-6

The synthetic route of 14161-11-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pharmacia & Upjohn Company; US5866589; (1999); A;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13327-27-0,6-Methylpyridazin-3(2H)-one,as a common compound, the synthetic route is as follows.

13327-27-0, 6-Methylpyridazin-3(2H)-one (Alfa, 2.5 g, 22.70 mmol) and phosphorus oxybromide (Aldrich, 16.27 g, 56.8 mmol) were heated at 90 C under a nitrogen atmosphere for 1.5 hours. After cooling, the mixture was poured onto ice (100 g), neutralized with sodium bicarbonate, and the aqueous phase was extracted with CH2Cl2 (3chi30 mL). The combined organic phase was washed with 5% NaHCO3, brine, dried (Na2SO4) and concentrated. The residue was dissolved in hot ethyl acetate and washed through a plug of silica gel, eluting with ethyl acetate and concentrated. MS (DCI/NH3) m/z 172 (M+H)+, 190 (M+NH4)+.

13327-27-0 6-Methylpyridazin-3(2H)-one 83346, apyridazine compound, is more and more widely used in various fields.

Reference£º
Patent; ABBOTT LABORATORIES; SCHRIMPF, Michael R.; LEE, Chih-Hung; LI, Tao; GFESSER, Gregory A.; MORTELL, Kathleen H.; FAGHIH, Ramin; NERSESIAN, Diana L.; SIPPY, Kevin B.; BUNNELLE, William H.; SCANIO, Marc; SHI, Lei; GOPALAKRISHNAN, Murali; DONNELLY-ROBERTS, Diana; HU, Min; WO2010/36998; (2010); A2;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6082-66-2,3,4,6-Trichloropyridazine,as a common compound, the synthetic route is as follows.

6082-66-2, Example 18A 5,6-dichloropyridazin-3(2H)-one [0749] 3,4,6-Trichloropyridazine (12 g, 65.4 mmol) in acetic acid (45 mL) was heated at 130¡ã C. for two hours. After cooling to room temperature, the reaction mixture was poured into ice water (200 mL). The solid was collected by filtration to give 3.7 g of the title compound.

As the paragraph descriping shows that 6082-66-2 is playing an increasingly important role.

Reference£º
Patent; HUBBARD, Robert D.; WANG, Le; PARK, Chang H.; SUN, Chaohong; McDANIEL, Keith F.; PRATT, John K.; SOLTWEDEL, Todd N.; WENDT, Michael D.; HOLMS, John H.; LIU, Dachun; SHEPPARD, George S.; US2013/331382; (2013); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

187973-60-0, 6-Iodopyridazin-3-amine is a pyridazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Method H: to a solution of compound 12a (788 mg, 3.24 mmol)in n-butanol (12 mL) was added compound 3 (717 mg, 3.24 mmol).The mixture was refluxed for 16 h, evaporated to dryness, and theresidue was suspended in CHCl3. The solution was made alkalinewith a 30% ammonium hydroxide solution and extracted withCHCl3. The combined organic layers were dried over MgSO4,filtered, and evaporated under reduced pressure to give the desiredimidazo[1,2-b]pyridazine 13a (1.20 g, 100%) as a brown solid.

187973-60-0, 187973-60-0 6-Iodopyridazin-3-amine 10867834, apyridazine compound, is more and more widely used in various fields.

Reference£º
Article; Moine, Esperance; Dimier-Poisson, Isabelle; Enguehard-Gueiffier, Cecile; Loge, Cedric; Penichon, Melanie; Moire, Nathalie; Delehouze, Claire; Foll-Josselin, Beatrice; Ruchaud, Sandrine; Bach, Stephane; Gueiffier, Alain; Debierre-Grockiego, Francoise; Denevault-Sabourin, Caroline; European Journal of Medicinal Chemistry; vol. 105; (2015); p. 80 – 105;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.123696-02-6,3-Chloro-5-methoxypyridazine,as a common compound, the synthetic route is as follows.

A degassed solution of 3-chloro-5-methoxypyridazine (473 mg, 3.27 mmol), 3,5-difluoro-4-trimethylstannanylpyridine (1.0 g, 3.6 mmol), copper [(I)] iodide (31 mg, 0.2 mmol) and lithium chloride (416 mg, 9.8 mmol) was formed in 1,4-dioxane (10 ml). Tetrakis (triphenylphosphine)- palladium [(0)] (100 mg) was added and the mixture heated to [80C] for 16 h. The solvent was removed and the residue was purified by flash column chromatography over silica using 40% isohexane: 60% ethyl acetate to give 3- (3, 5-difluoropyridin-4-yl)-5-methoxypyridazine as a pale yellow solid (220 mg): 8H (400 MHz, [CDCL3)] 7.10-7. 12 [(1H,] m), 8. 54 (2H, s), 9.02 [(1H,] d, [J 3.] 1); [7NLZ] (ES+) 224.

123696-02-6, 123696-02-6 3-Chloro-5-methoxypyridazine 10975612, apyridazine compound, is more and more widely used in various fields.

Reference£º
Patent; MERCK SHARP & DOHME LIMITED; WO2004/14865; (2004); A1;,
Pyridazine – Wikipedia
Pyridazine | C4H4N2 – PubChem